1. What is a Face Cord of Wood?

A face cord is a measurement of stacked firewood that typically measures 4 feet high by 8 feet long by 16 inches deep (the length of the firewood pieces). It represents one third of a full cord of wood.

2. How Does the Calculator Work?

The calculator uses the face cord formula:

Where:

• \( Length \) — Length of the wood stack in feet
• \( Height \) — Height of the wood stack in feet
• \( Depth \) — Depth of the wood stack in inches

Explanation: The equation converts the depth from inches to feet (by dividing by 12) and then calculates the cubic feet volume.

3. Importance of Face Cord Calculation

Details: Calculating face cords helps in estimating the amount of firewood needed for heating, comparing prices between different suppliers, and ensuring you get the amount you pay for.

4. Using the Calculator

Tips: Enter the dimensions of your wood stack in feet for length and height, and inches for depth. Standard face cord dimensions are pre-filled (4ft × 8ft × 16in).

5. Frequently Asked Questions (FAQ)

Q1: What's the difference between a face cord and full cord?
A: A full cord is 4ft × 8ft × 4ft (128 cubic feet). A face cord is typically 4ft × 8ft × 16in (42.67 cubic feet), which is 1/3 of a full cord.

Q2: Why is depth measured in inches?
A: Firewood is typically cut to 16-inch lengths, so depth is commonly measured in inches while the stack dimensions are in feet.

Q3: How much wood is in a face cord?
A: A standard face cord contains about 42.67 cubic feet of wood, which is roughly the equivalent of 200-275 pieces of firewood depending on size.

Q4: Are face cord dimensions regulated?
A: Unlike full cords which are legally defined in many areas, face cord dimensions can vary by region and seller, so always verify measurements.

Q5: How should firewood be stacked for accurate measurement?
A: Wood should be stacked neatly with minimal gaps, in a straight line with uniform dimensions for most accurate measurement.